Flange Isolation Kits consisting of an isolating gasket and isolating sleeves and washers

LineBacker® sealing gaskets use a rectangular sealing element, referred to as a "quad" ring, in combination with a unique groove design to effectively seal and isolate flanges of all types.

The Pikotek® PGE™ is a low-pressure service isolation kit designed for electrical flange isolation and/or general sealing applications

The PGE™ was designed to give operators an alternative to the failure prone phenolic-based isolating gaskets. The unique design of the PGE™ system incorporates patented overlapping and offsetting seal grooves.

PTFE spring-energized primary sealing element and an E-ring secondary seal, seated in an insulating laminate and permanently bonded to a high-strength metal core, creating a fireproof gasket

The VCFS™* adds fire service capability to the standard Pikotek® VCS design through the use of a secondary sealing element that is capable of maintaining a seal while subject to a 1500°F (815°C) fire.

A concave PTFE Inside Diameter (ID) seal and a PTFE spring-energized face seal, or an elastomeric O-ring, seated in an insulating laminate and permanently bonded to a high-strength core The VCS-ID (Inside Diameter) Seal introduces an internal, machined PTFE seal at the bore of the existing VCS design platform.

The VCXT™ high temperature flange insulation sets create a seal and maintain electrical isolation across a wide range of seating stresses and flange classes in elevated temperature service. They can be used in load compromised connections; such as damaged and/or lined flanges and also heavily bolted connections where significant gasket stresses may be generated.