Pig Tracking Equipment

pig tracking equipmentPig Tracking Equipment plays an essential role in an operator’s pigging activities. Knowing where the pig is and finding it if it gets stuck can save the user costly down time and frustration. Drinkwater Products keeps a wide range of tracking equipment for rental or purchase and has the hands-on experience to help you with product selection and tracking strategy.

Order by:
orderby
Display:

CD42-STS

The CD42-STS allows for subsea tracking of moving pigs and locating stationary or stuck pigs equipped with CDI's standard line of electromagnetic transmitters. The CD42-STS diver and ROV tracking system does not use radioactive isotopes.

CD42-T0 Transmitter (6" - 12")

The CD42-T0 is a durable stainless steel transmitter manufactured to exacting tolerances by CDI. It can be mounted in or on almost any type of pipeline pig and is recommended for pipeline diameters from 6" to 12". This transmitter is guaranteed to operate for a minimum of 168 hours on 6 N-Cell batteries. Programmable DELAY ON feature can be set for as long as 1 full year. Subsequent transmission can then run for as long as one year.

Geophones

The Enduro Wireless Geophone detects pig movement by sound amplification of normal noises created by pig passage. The Geophone unit can be placed on the ground or attached to exposed piping such as valve settings, vent pipes, etc...

LineStat

CDI’s TRAXALL LineStat is a global, value added satellite based event notification service provided by CDI and targeted primarily to the oil and gas pipeline industry. LineStat provides notification to email addresses and SMS text messaging telephone numbers of remote events from both fixed position and portable equipment. Some of the details included in event notifications messages are date, time, GPS position, battery status, and vibration. This information is transmitted via satellite without use of cellular networks and without needing a wired infrastructure of any kind.

MANTIS 820 ROV Tracking Receiver

The Receiver

The MANTIS 820 is CDI’s newest product for subsea pipeline pig tracking. The MANTIS is a deep-water ROV tie-in solution which provides all of the benefits of CDI’s multi-frequency electromagnetic pig tracking in a durable and robust package. The MANTIS 820 may be purchased or rented to use along with our wide family of TRAXALL Transmitters which include 8 ATEX variants. 

Pig Tracker Receiver and Wand

To locate a pig equipped with a SPY® Transmitter, the SPY® PTR (Pig Tracker Receiver and Wand) registers the changing magnetic field produced by the SPY® Transmitter. When the Transmitter is located, the PTR produces both an audio and visual output. With two standard 9-volt alkaline batteries, the PTR can be powered continuously for approximately 50 hours. Special wands are available for sub-sea applications, with depths of up to 10,000 feet [3000 meters]. 

PT 101 Transmitter

Line Pipe Size: 2" - 4". Max Pick Up Range: 15' - 20' (free air)

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping.

PT 107 Transmitter

Line Pipe Size: 2" - 8". Max Pick Up Range: 20' - 25' (free air)

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping.

PT 275 Transmitter

Line Pipe Size: 6" and up. Max Pick Up Range: 60' - 70' (free air)

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping.

PT 750 Transmitter

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping. Using strong, low frequency signals the Pig Tracker system gives you a more reliable signal life. Depending on the model, the Pig Tracker's signal can be received for up to 500 hours. It operates on standard batteries - readily available from retail stores. No recharger is necessary. The Pig Tracker system consists of a cylindrical transmitter which travels with the pig, and a hand-held pick up wand and receiver that receive the signals and inform the operator of the transmitter / pigs location.

T1A Transmitter

The CD42-T1A is a durable stainless steel transmitter manufactured to exacting tolerances by CDI. It can be mounted in or on almost any type of pipeline pig and is recommended for pipeline diameters from 8" to 28".

T3 Transmitter

The CD42-T3 is the slimmest transmitter in the industry, measuring in at 6.3" long and only 0.875" in diameter. Weight is a mere 13 ounces! Designed to fit inside the smallest 2 and 8 inch pipeline pigs, the CD42-T3's rugged stainless steel housing is compatible with hyrdrocarbons, ammonia and most cleaning chemicals found in pipelines.

Results 1 - 12 of 19
Copyright MAXXmarketing GmbH
JoomShopping Download & Support