Trenton Anticorrosion Materials
Since 1949 the Trenton Corporation has provided excellent anticorrosion coating systems for a variety of environments. A complete protection system, the Trenton Wax Tape System includes a selection of primers, tapes and outerwraps that work together to protect your resources. See our full line of Trenton wax tape products below.
#1 Wax-Tape is composed of a blend of microcrystalline waxes, plasticizers and corrosion inhibitors saturated into a non-woven, non-stitch bonded synthetic fabric, forming a tape wrapper. They also contain no siliceous mineral fillers.
#2 Wax-Tape® is a nonwoven, nonstitch bonded synthetic fabric, saturated with a blend of microcrystalline wax, solvents and corrosion inhibitors (no clay fillers), forming a tape wrapper that firms up and is suitable for painting.
Wax-Tape® Primer is a blend of microcrystalline waxes, plasticizers, and corrosion inhibitors (no clay fillers). It has a paste-like consistency and is designed to displace moisture and wet the surface, ensuring adhesion of the tape.
Temcoat™/Temcoat™ 3000 is a high-temperature microcrystalline wax-based coating compound that will not melt and can be applied at ambient temperatures up to 230°F They do not require a primer or curing time and are easily applied by hand. Temcoat 3000 is designed to maintain spreadability at lower temperatures.
Water or water vapor is present in most pipeline casings making possible galvanic corrosion of the carrier pipe. Also, a “water short” can occur through the water in the casing, allowing cathodic current to flow through the water and on to the pipe in the casing.
Fill-Coat #1® is a low melt point, hot-installed petrolatum compound that sets up relatively firm at ground temperatures commonly found in normal pipeline operations. It has good “wetting” and adhesion characteristics and prevents possible corrosion of pipe in casings.
Fill-Coat #2® is designed to be installed cold out of a 55 gallon drum for small quantity requirements. It remains in a firm gel consistency at ground temperatures commonly found in normal pipeline operations.
Fill-Coat #6® is a cold-installed/high temperature petroleum based casing filler compound that can be installed at ambient temperature as low as 50°F (10°C) with portable pumps. The product is used in bridge abutment casings, and it can be used in casings with elevated temperatures.
Pre-Con™ is a liquid casing water conditioner for pipeline casings. It consists of "wetting" and filming agents, vapor phase inhibitors, alkaline media additives and antibacterial conditioners.
Trenton Fill-Pro PM-GP™ Profiling Mastic is a specially formulated, moldable mastic for use with Trenton Wax-Tapes® and Wax-Tape Primers. FillPro PM-GP incorporates a blend of petrolatum and polymer-based components to form a cold-applied, self-adhesive and self-supporting mastic. FillPro PM-GP is compatible with all Trenton tapes and primers.
MC Outerwrap™ is a specialized blend of quick curing resins impregnated into a fiberglass fabric. It provides soil stress and backfill protection to coatings that need additional mechanical strength. MC Outerwrap is specifically designed as a “hard shell” outerwrap over the Wax-Tapes.
Innercoat® is a blend of microcrystalline waxes designed to provide the most desirable corrosion resistance, adhesion and wetting characteristics. It is hot-applied directly to the pipe surface and is always over-wrapped with a proper Trenton wrapper depending on the type of application.
JoomShopping Download & Support