Pipeline Pigging Accessories

Pipeline Pigging AccessoriesDrinkwater Products carries replacement parts for your pipeline pigs. Whether you need replacement urethane cups or discs for your steel body pig or brushes for a cast-urethane pig, we have what you need. View our full line of Pipeline Pigging Accessories below.

Order by:
orderby
Display:

Sizing Rings

Drinkwater Products sizing rings are built from lightweight, durable aluminum. The inside diameter is machined to a specified size to allow the operator to easily check and reproduce the proper inflation sizing of pipeline and prover spheres for use.

At the time of an order, the customer will need to furnish the nominal pipe inside diameter and percentage interference. For example a 8" Standard Wall Pipe = 7.981” ID, with a 3% interference, yields a desired sizing ring diameter of 8.22”. Or, if the actual internal diameter of the ring is known, the finished part can be cut to the specified size.

Sizing rings are available for the full range of inflatable spheres.

Brushes

Brushes are used for cleaning the interior of the pipeline where wax, asphaltenes, scale, salt, sand or debris are present.

Cups & Discs

Drinkwater Products cups and discs are made of the highest quality materials for maximum abrasion resistance, elongation, sheer strength and chemical resistance to assure the best performance under the largest variety of pipeline conditions. Center-hole and bolt-circle dimensions can be customized to fit any pig body on the market, making them the ideal replacement cups and discs. Our cups and discs are designed to maintain a positive seal while also supporting the pig body. Multiple durometers are also available for specific applications. Cups and discs can be made out of urethane, neoprene and nitrile. The cups and discs are available in a full range of diameters up to 56". 

 

 

Pig Baskets

Drinkwater Products can design pig baskets to your specifications. These pig baskets catch pigs as they enter the receiver barrel and help prevent the pigs from going down your bypass line.

Magnets

Magnets are often mounted on the body of the pig to pick up any metallic debris that might be in the pipeline. Drinkwater Products offers several varieties of magnets that can be fitted to most pigs.

Gauge Plates

Gauging plates are used for checking out-of-round pipes, dents or anomalies in the line. The most common material used is aluminum but steel is also available. For added information, slots can be cut into the plate to allow for better knowledge of the damaged area. Gauge plates can be made to any requested OD and to fit any steel body bolt hole circle pattern.

Blades

Urethane blades provide the tough scraping action necessary to remove soft internal deposits.

Pipeline Pigging Dust Bag

Pipeline Pigging Dust Bags eliminate environmental pollution arising from pigging a pipeline with nitrogen or air by catching pipeline pigs, dust particles, mill scale and other construction debris

PigginPoles

PigginPoles (standard set) consist of three sections pinned together for a total length of 18'. One end of the pole has a four-inch round ram, making it easy to seat the pig, and the other end has a hook for easy pig retrieval. Optional handle makes handling the pigs even easier.

Pig Washer

Our Pig Washer allows for pipeline companies to efficiently clean and maintain pigs at their facility. Our pig washer saves you time by not having to spend hours removing paraffin, asphaltenes, black powder and other unwanted debris from your pig. It also saves you money by not having to pay a third party company to come and clean your pigs. Lastly, the regular cleaning of your pipeline pigs extends the life of your pig by removing harmful pipeline debris from the pig itself.

Pipeline Pigging Dewater Bag

Pipeline Pigging Dewater Bags or pipe socks, filter water to remove sediment and other pollution or waste.
Copyright MAXXmarketing GmbH
JoomShopping Download & Support