Pre-Con™ is a liquid casing water conditioner for pipeline casings. It consists of "wetting" and filming agents, vapor phase inhibitors, alkaline media additives and antibacterial conditioners.

End Use

Pre-Con is poured into the casing prior to the installation of Trenton Fill-Coat® casing filler. The method of using these two materials together is a Trenton Corporation patented process*. Pre-Con conditions the water accumulated in the casing so that any small amounts of water that may be entrapped after installation of Fill-Coat casing filler are inhibited and no corrosion should occur.

Application Procedures

Prior to the filling operation, Pre -Con is poured directly into the casing through the casing vent and mixes with any water accumulated inside the casing. The casing can then be filled with Trenton Fill-Coat Casing Filler.


Pre-Con™ is packaged in one-gallon pails or it is provided in bulk at the job site when Trenton crews install Fill-Coat® casing filler.

Published in Casing Filling
Read 3232 times Last modified on Tuesday, 30 April 2019 15:00