Transmitters


Multi-Frequency TRAXALL Transmitter

ATEX pig tracking transmitters are available!The X400 transmitter family are CDI's largest TRAXALL compatible electromagnetic transmitters. This family consists of four transmitters which house 2, 3, 4 or 5 D-Cell batteries. These transmitters have both user-adjustable frequency and output power through the use of CDI's FieldLink wireless communications system. Using CDI's TRAXALL transmitters, an operator may have direct control over battery life vs. strength tradeoffs. Short pig runs can go for maximum power and long pig runs can be more conservative with pulsing modes and/or reduced power.

Multi-Frequency TRAXALL Transmitter

The X300 transmitter family are CDI's mid-sized TRAXALL compatible electromagnetic transmitters. This family consists of four transmitters which house 2, 3, 4 or 5 C-Cell batteries. These transmitters have both user-adjustable frequency and output power through the use of CDI's FieldLink wireless communications system. Using CDI's TRAXALL transmitters, an operator may have direct control over battery life vs. strength tradeoffs. Short pig runs can go for maximum power and long pig runs can be more conservative with pulsing modes and/or reduced power.

Multi-Frequency TRAXALL Transmitter

The X200 transmitter family are CDI's small-sized TRAXALL compatible electromagnetic transmitters. This family consists of two transmitters which house either 2 or 3 AA-Cell batteries. These transmitters have both user-adjustable frequency and output power through the use of CDI's FieldLink wireless communications system. Using CDI's TRAXALL transmitters, an operator may have direct control over battery life vs. strength tradeoffs. Short pig runs can go for maximum power and long pig runs can be more conservative with pulsing modes and/or reduced power.

Multi-Frequency TRAXALL Transmitter

The X100 transmitter family are CDI's smallest TRAXALL compatibleelectromagnetic transmitters. This family consists of five transmitters which house 1, 2, 3, 4 or 5 N-Cell batteries. The X100-1N is by far the smallest pig tracking transmitter in the world. These transmitters have both user-adjustable frequency and output power through the use of CDI's FieldLink wireless communications system. Using CDI's TRAXALL transmitters, an operator may have direct control over battery life vs. strength tradeoffs. Short pig runs can go for maximum power and long pig runs can be more conservative with pulsing modes and/or reduced power.

The CD42-T0 is a durable stainless steel transmitter manufactured to exacting tolerances by CDI. It can be mounted in or on almost any type of pipeline pig and is recommended for pipeline diameters from 6" to 12". This transmitter is guaranteed to operate for a minimum of 168 hours on 6 N-Cell batteries. Programmable DELAY ON feature can be set for as long as 1 full year. Subsequent transmission can then run for as long as one year.

The CD42-T1A is a durable stainless steel transmitter manufactured to exacting tolerances by CDI. It can be mounted in or on almost any type of pipeline pig and is recommended for pipeline diameters from 8" to 28".

The CD42-T3 is the slimmest transmitter in the industry, measuring in at 6.3" long and only 0.875" in diameter. Weight is a mere 13 ounces! Designed to fit inside the smallest 2 and 8 inch pipeline pigs, the CD42-T3's rugged stainless steel housing is compatible with hyrdrocarbons, ammonia and most cleaning chemicals found in pipelines.

The CD42-T4 stainless steel transmitter is a shortened version of our slim CD42-T3 transmitter. This short and stocky transmitter with a knurled screw-off cap is targeted at small diameter pipelines with tight radius bends as well as customers that use spherical pigs in small lines. The CD42-T4 transmitter may be ordered with or without a flange kit as shown. Operating pressure is rated at 2,500 PSI [172 bar] with a standard battery life of 200 hours that may be extended by slowing the transmission pulse rate. Custom transmission patterns are programmed at the time of manufacture.

Line Pipe Size: 2" - 4". Max Pick Up Range: 15' - 20' (free air)

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping.

Line Pipe Size: 2" - 8". Max Pick Up Range: 20' - 25' (free air)

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping.

Line Pipe Size: 6" and up. Max Pick Up Range: 60' - 70' (free air)

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping.

The Spy Pig Tracker is an electronic pig locating system that will locate your pigs wherever they go - through gathering lines, mainline transmission lines, municipal gas, water and waste water lines, refinery and other industrial piping. Using strong, low frequency signals the Pig Tracker system gives you a more reliable signal life. Depending on the model, the Pig Tracker's signal can be received for up to 500 hours. It operates on standard batteries - readily available from retail stores. No recharger is necessary. The Pig Tracker system consists of a cylindrical transmitter which travels with the pig, and a hand-held pick up wand and receiver that receive the signals and inform the operator of the transmitter / pigs location.

The Drinkwater Difference