Innercoat for Pipeline Reconditioning and Gaurd Wrap
Innercoat Hot-Applied Wax and Guard-Wrap provide an excellent coating system for pipeline reconditioning, weld cutbacks and field patching. The Innercoat and Guard-Wrap system is environmentally safe and user friendly. Innercoat is compatible with other coatings and has a proven field history with over 45 years of use.
After minimal surface preparation, hot Innercoat is flood-coated onto the pipe. Innercoat is self-priming. There are no toxic fumes.
Guard-Wrap is spiral-wrapped over the Innercoat to provide backfill protection and to increase dielectric strength.
Immediately after application, the pipe can be inspected and backfilled. 
Description
Innercoat is a blend of microcrystalline waxes designed to provide the most desireable corrosion resistance, adhesion, and wetting characteristics. It is hot-applied directly to the pipe surface and is always over-wrapped with a proper Trenton wrapper depending on the type of application. Its ease of application and "forgiving" character in difficult applications make it an ideal all purpose pipe coating.
End Use
To protect metal surfaces from corrosion. For patching, Innercoat is heated by appropriate means and applied by hand in the field.
Packaging
47 lb. metal container
7 1/2 lb. blocks (10 per case)
7 1/2 lb. blocks (quartered)
Specifications
Color ------------------------------ Brown
Specificgravityat77°F------- .88-.94
Flashpoint,min----------------- 500°F
Meltingpoint -------------------- 160°-175°F
Penetrationat77°F----------- 26-50
DielectricStrength ------------ 100volts/mil
Advantages
• An effective pipe coating proven by over 45years field use
• Excellent corrosion barrier
• Low moisture absorption and transmission
• Excellent dielectric barrier
• Excellent wetting and adhesion properties
• Excellent ductility
• Permanently inert
• Resistant to chemical sand bacteria commonly found in soils
• Easy to apply
• Compatible with other coating materials
• Can be reheated without altering composition
• No primers required
• No waiting before backfilling
• No dangerous fumes
• Non-toxic
• Packaged inconvenient 7 1/2 lb. blocks or 47 lb.cans
Guard-Wrap
Description
Guard-Wrap is a pipe wrap consisting of a spun plastic mat saturated with petroleum wax to which a dielectric film is laminated, also with a petroleum wax. It is used to provide additional mechanical strength against backfill stress while also contributing an added dielectric barrier. Guard-Wrap is completely conformable and has excellent dead-fold properties (like aluminum foil when crumpled up) making it ideal for irregular fittings as well as straight pipe.
End Use
As a wrap over hot-applied Innercoat coating to protect straight pipe, welds, couplings or other irregular metal surfaces.
Packaging
In cardboard cartons with the number of rolls per carton times the roll width equaling 36".
Rolls are available in 6", 9", 12", and 18" widths by 150' length.
Specifications
Color ------------------------- Brown
Saturantmeltpoint -------- 135°-150°F
Plasticmembrane--------- .5mil
Thickness-------------------- 10-14mils
Dielectricstrength---------- 3500voltsmin.
Advantages
• Withstands hot-application temperatures
• A two part wrapper (plastic mat and film) for extra mechanical strength
• Excellent dielectric strength
• Conformable to irregular shapes
• Composed of inert materials
• Resistant to chemicals and bacteria
Estimated Quantity Required
(HandApplication)
